Products and Services

• Load Cells
• Torque Sensors
• Multi-axis load cells
• Vehicle Test Sensors
• Custom Products
• Instruments and DAQ Systems
• Test & Quality Control Products
  • Weld force measurement
  • Power Monitoring Dynamomoter
  • Torque Verification System
  • Small Motor Dynamometer
  • PTI/PMAC/USB Sensor System Examples
• Services
• Reference Material

Torque Verification [ 90229 ]

Torque Verification [ 90229 ]

SDI’s 90229 is designed for calibrating tools used to apply torque including electric and pneumatic power tools, torque sensors, hand and click wrenches. The strain gage based reaction torque sensors in the bench-mount housing remain stationary while torque is applied. The housing dis-assembles by removing two snap pins, allowing the user to easily change socket sizes and capacities.

SPECIFICATIONS
Model 90222 PMAC 2000
Sampling rates..............................................
  Track .................................................4 Hz
  Peak .................................................5 kHz
Scope functions.......................selectable up to 10 kHz
Frequency response ........................(-3 dB) at 1000 Hz
Accuracy ...........................max error = 0.05% of F.S.
Sensor interface............................................
  Max input at F.S. ............................+/- 4.5 mV/V
  Polarity ..........................................Bipolar
  Bridge excitation ............................7 V supplied
  Minimum bridge impedance ..............................120
  Data output ...........RS-232 port ASCII, 9600 baud, 8-N-1
Power.......................................................
  AC (adapter supplied)............. 115 V ac (220 optional)
  Batteries .....................9.6 V internal/rechargeable

SPECIFICATIONS
Model 01190 (select any two)
  1/4” drive....................................... 50 in-lbs.
  1/4” drive...................................... 125 in-lbs.
  3/8” drive...................................... 200 in-lbs.
  3/8” drive....................................... 50 ft-lbs.
  1/2” drive...................................... 125 ft-lbs.
  1/2” drive...................................... 200 ft-lbs.
Overload capacity................................ 150% of F.S.
Output at F.S................................ 2.0 mV/V nominal
Non-linearity................................... 0.10% of F.S.
Hysteresis...................................... 0.10% of F.S.
Zero balance.................................... 1.00% of F.S.
Useable temperature............................. -65 to +250°F
Bridge resistance................................... 1000 Ohms
Excitation voltage, maximum........................... 20 V dc

ADDITIONAL INFORMATION