Rod End Force [ 10144 ]

Rod End Force [ 10144 ]
Rod End Force [ 10144 ]

This sensor is capable of measuring forces in both tension and compression. The load cell is machined from 4140 steel, and is supplied with a metal housing, providing mechanical protection for the sensing section. A side mounted industrial connector is supplied for easy cable connection.This cell is designed for direct attachment to hydraulic actuators.


SPECIFICATIONS
Capacities........................ 1K - 20K lb. (See chart)
Overload capacity............................. 150% of F.S.
Output at F.S.......................... 2.0 mV/V nominal
Non-linearity.................................... 0.10% of F.S.
Hysteresis....................................... 0.10% of F.S.
Zero balance........................................ 1% of F.S.
Compensated temperature............... 70 to 170°F
Useable temperature...................... -65 to +250°F
Temperature effect on zero..... 0.002% of F.S./°F
Temperature effect on span.. 0.002% of Rdg./°F
Bridge resistance................................. 350 Ohms
Excitation voltage, maximum.................... 20 Vdc
Material ............................................... Alloy steel

Fatigue Resistant Threaded Rod Sensor [ 10254 ]

Fatigue Resistant Threaded Rod Sensor [ 10254 ]
Fatigue Resistant Threaded Rod Sensor [ 10254 ]

This sensor incorporates a welded diaphragm system that isolates the sensor from extraneous forces and bending moments. The 10254 may be used in tension or compression and is fatigue resistant.


SPECIFICATIONS

Capacity .................................. F.S. 1,000 - 25,000 lb.
Output F.S., nominal ............................... 2.0 mV/V
Bridge resistance ...................................... 350 Ohms
Other specifications are same as model 10144.

ADDITIONAL INFORMATION

 Product Specs [PDF]  Drawing 1 [DWF]
[10144]		 Drawing 2 [DWF]
[10254]